Address
No. 128, Binhe Road, Gongyi City
Zhengzhou City, Henan Province, China, 451200

Contact us
Phone: (+86) 13386837400
WhatsApp/WeChat: (+86) 13386837400

SAND MAKING MACHINE

Applied materials: rock, aggregate, gravel, granite, limestone, quartz, basalt, cobble, dolomite, calcite, etc. The sand making machines mainly run in two ways: stone to stone or stone to steel and process materials with medium and high hardness.

CAPACITY: 15-310t/h

MAX FEEDING SIZE: 80mm-200mm

RAW MATERIALS: Limestone, marlstone, sand stone, gypsum, coal, etc

Category:

What materials can be processed by the sand making machine?

  1. River pebbles, rocks (limestone, granite, basalt, diabase, andesite, etc.), sandstones, quartz sandstone, ore tailings, steel slag, construction wastes, etc.
  2. Construction aggregates, road materials, bedding materials, asphalt concrete and cement concrete aggregates.
  3. Glass, quartz sand and other high-purity materials.

HVI SERIES SAND MAKING MACHINE
Materials can be processed by sand making machine

 

Sand making machine adopts advanced technology and the best design of the material impact angle of the crushing chamber. Its wearing parts are not easy to wear and consume. The advantages of the equipment are as follows:

HVI sand making machine

Sand making machine

  1. Good sand making effect and high sand production rate.
  2. Shaping function. The finished products are uniform, beautiful in size and better in grain shape.
  3. Its protecting plates can be turned up and down to extend its service life.
  4. Combined but ends. Only the worn parts need to be replaced, which can reduce the use cost of 30%.
  5. The center and periphery feeding can be adjusted flexibly and converted conveniently.
  6. The lubrication method can be selected. The thin oil type and grease type modular design of the bearing chamber can realize the overall interchange.

How does the sand making machine work?

The material flows into the vortex crushing cavity from the upper part of the machine. The high-speed rotating impeller crushes the material scattered around the impeller in the form of an umbrella.

After the materials collide with each other, the material layer between the impeller and the casing will form a vortex flow for multiple collisions, friction and crushing, and then be discharged from the lower discharge hopper. The particle size of the finished product is controlled by the screening plant.

During the whole crushing process, the materials will be crushed by themselves through impacting each other, which reduces pollution and prolongs the mechanical wear time. The ingenious air circulation inside the vortex cavity eliminates dust pollution.

How to choose the sand making machine that benefits you most?

Types Mobile sand making machine VSI sand making machine
Similarity 1. Both models have “rock on rock” and “rock on iron” can be selected.
2. The material can be crushed into 0-5 mm sand, and the output size can be adjusted.
3. Both types of sand making machines have many models, which can be suitable for all of you.
4. Both can be equipped with a mobile crushing station to form a mobile sand making plant.
Unique advantages Applied to various operations with greater mobility. 10% higher output than that of HVI sand making machine.
Price Higher Moderate price, high cost performance.

Reviews

There are no reviews yet.

Be the first to review “SAND MAKING MACHINE”

Related products